REAL ROC TEXTURED FINISH (Available in 0.5 mm, 1 mm, 2 mm and 3 mm thickness) (EXTERIOR & INTERIOR APPLICATION)
Duracoat Real Roc range of textured finishes are formulated by using Light fast pigments, special type of resin, tough aggregates, unique additives to resist fungus, algae and mould growth. It protects the exterior surfaces from rain, sun and dust.
The Real Roc product range comprises of four different finishes;
- 0.5mm textured finish
- 1 mm textured finish
- 2 mm textured finish
- Withstand extreme climatic conditions
- Forms a full-bodied flexible film which moves with temperature and bridges hair cracks.
- Contains special additives which protect algae and fungal growth and hence has excellent anti-algae/fungal properties.
- Is a thicker coating than any normal finish
- Gives extra protection because it has higher film thickness.
- Has high water repellency and excellent opacity
- Exhibits outstanding color fastness
- Is crack resistant
- Has excellent heat, light and alkali resistance
- Is extremely durable and gives beautiful matt finish.
Real Roc finishes are recommended for interior and exterior application. It can be applied on a variety of surfaces such as plaster, brickwork, concrete, hardboard etc. by using suitable priming coat.
It is highly recommended that one coat of suitable undercoat be applied with brush on all the surfaces. The colour of the undercoat should be close to the colour of the Real Roc final Product. All Real Roc products should be applied with stainless steel trowel, for finishing use special plastic trowel. Do not apply any of the textured finish when raining or if rain is forecasted within 5 hours from the time you start application.
New and Unpainted Surfaces:
All surfaces must be clean, dry and free from dust, grease or nay loose materials. Apply one coat of Emulsion Undercoat.
Previously Painted Surfaces in Sound Conditions:
If existing paint work is in a good condition, the surface should only be cleaned, sanded and one coat of undercoat applied.
Previously Painted Surfaces in Unsound Conditions:
Apply one coat of Duracoat White or Pink wood Primer followed by one coat of Duracoat Emulsion Undercoat.
Brick and Asbestos
These should be sealed with one coat of Duracoat Acrylic Sealer to reduce absorption followed by one coat of Emulsion Undercoat.
Supplied ready for use, however if thinning is required add small amount of clean water.
Surface Dry- 1 hour. Hard Dry:24 hours
Clean equipment immediately with water.
Colour Range: A wide range of shades available from the Duracoat colour chart, Duracoat Classic and Colour Plus fandecks.
Stone Finish: Approximately 4kg for 1sq/m
0.5mm textured finish: Approximately 3kg for 1sq/m
1 mm textured finish: Approximately 3kg for 1sq/m
2 mm textured finish: Approximately 3kg for 1sq/m